Analysiscasting mouldWhat kind of mold structure to use, arrange product technology, determine the content of each process, and use design software for product design. When designing a product, it usually starts with a subsequent process. Next, say.casting mouldDaily maintenance of knowledge:

1. The punch is incasting mouldIt is easy to break, bend and bite during use, and the punch sleeve is generally bitten. Damaged punches and sleeves are generally replaced with parts of the same specification. The parameters of the punch mainly include the size of the working part, the size of the installation part, the length size, etc.

2,Fastening components. Check for loose or damaged fastening parts. The method used is to replace parts of the same specification.

3, maintenance pressure plate, excellent force plate, discharge plate, pneumatic ejection and other pressure partscasting mouldWhen, check the relationship between the various parts and whether there is damage, repair the damaged parts, check whether there is air leakage in the gas cylinder cap, and take measures according to the specific situation. If the trachea is damaged, replace it. Should be checkedcasting mouldSeveral important parts: the ejection and guiding parts are used to determine the opening and closing movement of the mold and the ejection of the plastic parts. If any part of the mold gets stuck due to damage, it will cause production to stop. Therefore, the mold ejector should be maintained frequently. After completing a production cycle,casting mouldThe working surface, movement and guiding parts are coated with anti-rust oil. Special attention should be paid to the elastic strength of the bearing parts of the gear, rack mold and spring mold to ensure that they are always in working condition.

4,casting mouldLong-term sharpening of the cutting edge, cutting edge surface grinding back magnetic, can not be magnetized, otherwise it is easy to cause blockage. The mold user company needs to record and count its use, maintenance (lubrication, cleaning, anti-rust) and damage in detail, and provide discovery and solution information based on which parts are damaged and worn. andcasting mouldThe molding process parameters and the materials used in the product can shorten the trial operation time of the mold and increase the production speed.

5,casting mouldElastic parts such as springs are easily damaged during use and usually break and deform. The approach is to change. Replacementcasting mouldPay attention to the specifications of the spring. The specifications of the spring are determined by the color, outer diameter, and length. Only the three items can be changed.