AnalysisAluminumCasting mold, what kind of mold structure, arrange the process of the product, determine the content of each process, and use the design software to design the product. When designing a product, it usually starts with a subsequent process. Next, say.AluminumDaily maintenance of casting mold knowledge:

1. The punch is inAluminumCasting mold is prone to break, bend, bite, punch sets are generally bitten. Damage to the punch and sleeve is generally replaced with parts of the same specification. The parameters of the punch mainly include the size of the working part, the size of the installation part, the length size, etc.

2,Fastening components. Check for loose or damaged fastening parts. The method used is to replace parts of the same specification.

3. Compression plate,Youli BoardEqual pressure parts, discharge plate, pneumatic ejector, etc. RepairAluminumWhen casting the mold, check the relationship between the components and whether there is damage, repair the damaged parts, check whether the pneumatic jacking has air leakage, and take measures according to the specific situation. If the trachea is damaged, replace it. Should be checkedAluminumSeveral important parts of the casting mold: the ejection and guiding parts are used to determine the movement of the opening and closing of the mold and the ejection of the plastic parts. If any part of the mold gets stuck due to damage, it will cause production to stop. Therefore, the mold ejector should be maintained frequently. After completing a production cycle,AluminumThe working surface of the casting mold, the movement, and the guide are all coated with anti-rust oil, and special attention should be paid to protect the elastic strength of the bearing parts of the gear, rack mold and spring mold,Make sure they are always in working condition.

4,AluminumThe cutting edge of the casting mold is sharpened for a long time, and the cutting edge surface is magnetized after grinding and cannot be magnetized, otherwise it is easy to cause blockage. mould user companyNeedDetailed records, statistics of its use, maintenance (lubrication, cleaning, rust prevention) and damage, according to which parts have been damaged, wear degree, etc., to provide information for discovery and solution. andAluminumThe molding process parameters of the casting mold and the materials used in the product can shorten the trial operation time of the mold and increase the production speed.

5,Aluminumcasting mouldofElastic parts such as springs are easily damaged during use and usually break and deform. The approach is to change. ReplacementAluminumcasting mouldofIn the process, pay attention to the specifications and models of the spring. The specifications and models of the spring are determined by three items: color, outer diameter, and length. Only the three items are the same can be changed.